This is where you perform all the settings to do with screen display.

Here you determine what you see in your circuit program:

• Comments

• Connector Names

• Block Parameters

Other possible settings:

• Antialiasing. With Antialiasing corners and edges appear softened.

• If you have View > Select lines switched on, with Label marked lines you establish that marked lines are to be labeled as shown in the following example:

B007 > B006/2 means: the connection runs from block 7 to block 6 at pin 2. Connections are not labeled if the target block to which the connection is running is located in the immediate vicinity.

• You determine whether LOGO!Soft Comfort should note the size and position of dialogs that have been opened once.

• You also determine whether LOGO!Soft Comfort should note the entire working environment (position of windows, opened circuit programs etc.).